
Surface-mounted DIN-standard terminal units for oxygen, nitrous oxide, medical air, vacuum and carbon dioxide.
52 products in 11 categories, from the outlet at the bed to the manifold in the plant room. Filter by category or search, and open any product for its specifications and a quote.
Showing 52 products

Surface-mounted DIN-standard terminal units for oxygen, nitrous oxide, medical air, vacuum and carbon dioxide.

The four outlet standards we supply, so new outlets match the equipment and probes your hospital already uses.

A flush panel carrying oxygen, nitrous oxide, medical air, vacuum and suction outlets behind one clean face.

Stainless-steel concealed outlet panel for clean areas where surfaces are wiped down often.

Stainless-steel back box that houses multiple gas outlets flush with the wall.

Mild-steel concealed outlet box, a cost-effective choice for wards and general areas.

Non-interchangeable screw-thread connectors that make it impossible to couple the wrong gas.

A lockable, windowed box with a ball valve and pressure gauge per gas, so each zone can be isolated for maintenance or in an emergency.

Full-bore brass ball valves with lever handles for isolating pipeline sections.

Six-channel digital alarm panel with a live pressure display and high, normal and low indicators per gas.

Monitors oxygen, medical air and vacuum pressure individually, with live readings and visual and audible alarms.

Gas monitoring display and zone isolation valves combined in one lockable enclosure.

A complete zone station: four-gas alarm panel with gauges above a valve box, piped and labelled.

Gauge-based alarm for oxygen, air and vacuum with high, normal and low lamps.

Switches between cylinder banks on its own, keeps pressure steady and sends SMS alerts to the plant operator and the person in charge.

Wall-mounted automatic manifold panel that changes over from the empty bank to the full one with no break in supply.

Change-over panel installed with copper pigtails on a twin-bank cylinder header.

Gauge-led control panel with a left and right bank, switched by hand when one bank runs low.

Three cylinders a side, a control panel with display and gauges, solenoid valves and a beacon alarm.

A compact two-cylinder manifold with an emergency supply connection.

PSA oxygen plant linked to left and right cylinder banks and an emergency manifold or LMO tank through one automatic controller.

Brass non-return valves for manifold headers, stopping back-flow between cylinders.

Manifold rooms we have planned and installed: headers, pigtails, regulators, control panels and copper distribution.

Duplex receiver-mounted units for medical air and central vacuum, installed with filtration and distribution pipework.

The full air train: intake, pre-filter, refrigerated dryer, after-filter, receivers, line and micro filters, oil-water separator and auto drain.

Copper pipe and fittings for the medical gas distribution network.

Colour-coded high-pressure tube coils for gas connections.

Yellow nylon hose for vacuum and suction connections.

Aluminium bed head panel with oxygen, medical air and vacuum outlets beside four switched power sockets.

Bed head panel with equipment rails above and below for monitors, flowmeters and suction units.

Two-tier panel separating gas outlets and data points from power sockets.

A vertical column of gas outlets and power sockets with side arms for an IV pole, monitor shelf and basket.

The same panel in yellow, teal, red, white, blue and pink trims to match your ward interiors.

Back-pressure-compensated oxygen flowmeter with an autoclavable humidifier bottle, plugged straight into the wall outlet.

Clear, autoclavable humidifier bottle with level markings, used with distilled water.

Oxygen regulator with contents gauge, flowmeter and humidifier for use straight on a cylinder.

Wall-outlet vacuum regulator with gauge, on/off control and a graduated collection jar.

Compact ward suction unit with a 600 mL jar.

High-capacity ward suction unit with a 2000 mL jar.

Replacement 600 mL collection jar with lid and float.

Replacement 2000 mL collection jar with clamped lid.

Stand-alone vacuum regulator with gauge for pipeline suction.

Twin-jar suction trolley on wheels that runs from the central vacuum line, with a left / right / both selector.

Multi-section operating table with powered positioning and a control panel on the column.

Operating table fitted with a traction frame, leg supports and arm boards for orthopaedic surgery.

Stainless-steel operating table with a sectioned top and leg plates that drop and split.

Ceiling-mounted twin LED surgical lights on articulated arms, each with its own control panel.

Single LED surgical light with a digital control panel on the arm.

Stainless-steel instruments for general surgery: forceps, scissors, needle holders, retractors and scalpel handles.

Everyday theatre supplies: drapes, gauze, antiseptic solutions, trays and sterile disposables.

Masks, gloves, syringes, sample tubes and other single-use items for wards and clinics.

Spare humidifier bottles, jars, hoses, probes and connectors to keep your oxygen and suction points working.

Wall outlets and concealed outlet panels for every gas.
6 products
Zone isolation, ball valves and pressure monitoring.
7 products
Automatic and semi-automatic oxygen supply plants.
9 products
Oil-free compressors, dryers, filters and vacuum pumps.
2 products
Medical-grade copper pipeline and colour-coded hose.
4 products
Gas outlets, power and data at every bed.
5 products
Flowmeters, humidifiers and cylinder regulators.
3 products
Ward suction units, jars and theatre suction trolleys.
7 products
Electro-hydraulic and stainless-steel OT tables.
3 products
Ceiling-mounted LED surgical lights.
2 products
Instruments, OT consumables and patient-care supplies.
4 productsSite survey, layout, supply, installation, testing and commissioning, and service after handover. Call +91 86950 94933 or send an enquiry.